«

»

Jan 31

Three Oil Soap Recipe

3 Oil SoapThis is one of my favorite soap recipes because it uses common oils that can be found in the grocery store, and it achieves an awesome balance of key soap qualities including INS (“a measure of the physical qualities of the soap based on the SAP and iodine value” according to SoapCalc, and which some soap makers find very useful for recipes), hardness, conditioning, bubbliness, creaminess, and cleanliness.

Ingredients:

  • 11.4 oz. water
  • 4.4 oz. lye
  • 12 oz coconut oil
  • 12 oz. new Crisco with palm
  • 6 oz. olive oil
  • 4 oz. fragrance oil
soap mixing

I let the KitchenAid run until a good trace is achieved.

Directions:

  1. Slowly add the lye to the water.

    NOTE: it is very important that you follow safety precautions while handling lye!  Never add the water to the lye, always the other way around because lye is very caustic!  Also wear gloves, goggles, and a mask while handling lye because if the mixture touches the skin it will burn and the mixture releases fumes.

  2. Melt all three oils and mix them with a hand mixer or KitchenAid, which is what I use.
  3. Slowly add the lye to the oil mixture while stirring.
  4. Add the fragrance oil to the mixture.
  5. Mix all ingredients with a hand mixer or KitchenAid until the soap mixture has a nice trace.  “Trace” refers to the thickness of the mixture and once the mixture looks thick like pudding and is mixed well, with no shiny oil spots, then trace has been achieved.
  6. Pour the mixture into a soap mold.  My favorite is the Bramble Berry silicone mold.
  7. Allow at least 24 hours for the soap to harden.
  8. Once hardened, cut the soap and allow another day or so for the soap to continue to harden and dry.
soap cutter

My super awesome Bramble Berry soap cutter!

Once complete, enjoy!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>